Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)
- 页数
- 23
- 格式
- 大小
- 785 KB
- 语言
- EN
- 年份
- 2019
- Trường
- Đại học Bách khoa Hà Nội
- 浏览量
- 0
- 评论
- 0
- 下载次数
- 0
Tài liệu này giới thiệu về hệ thống lắp ráp tự động, bao gồm các khái niệm cơ bản, mục tiêu học tập, các cấu hình hệ thống, và phân tích định lượng. Tài liệu cũng đề cập đến tự động hóa một phần và các câu hỏi tự đánh giá.
常见问题
此文档免费吗?
是的。“Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)”是免费的 — 只需登录并点击“下载”即可获取原始文件。
这份文档有多少页?
该文档共有 23 页,适用于课程 Tự động hóa sản xuất。您可以在下载前进行在线预览。
此文档包含答案吗?
是的。文档“Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)”包含答案 / 题解。
我可以在下载前预览吗?
是的。您可以通过在线阅读器直接在本页面预览此文档,然后再决定是否下载。
- 文档名称
- Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)
- 学校 / 课程
- Đại học Bách khoa Hà Nội · Tự động hóa sản xuất
- 内容
- Tài liệu này cung cấp cái nhìn tổng quan về hệ thống lắp ráp tự động, bao gồm các khái niệm cơ bản, cách thức vận chuyển bộ phận, và phân tích định lượng. Nó cũng thảo luận về các cấu hình hệ thống và tự động hóa một phần.
- 目录
- 14. Automated Assembly Systems
- 14.1 Unit Introduction
- 14.2 Unit Objectives
- 14.3 Fundamentals of Automated Assembly Systems
- 14.4 Parts Delivery at Workstations
- 14.5 Quantitative Analysis of Assembly Systems
- 14.6 Partial Automation
- 14.7 What the Equations Tell Us
- 14.8 Unit Review
- 14.9 Self Assessment Questions
- 14.10 Self Assessment Answers
- 14. Introduction
- 14.2 Learning Objectives
- 14.3 Fundamentals of Automated Assembly Systems
- 14.3.1 System Configurations
- 页数
- 23 页
- 上传者
- Uni24h
- 答案
- 包含答案 / 解析
正在生成预览...
描述
Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)
14. Automated Assembly Systems 14.1 Unit Introduction 14.2 Unit Objectives 14.3 Fundamentals of Automated Assembly Systems 14.4 Parts Delivery at Workstations 14.5 Quantitative Analysis of Assembly Systems 14.6 Partial Automation 14.7 What the Equations Tell Us 14.8 Unit Review 14.9 Self Assessment Questions 14.10 Self Assessment Answers 14.1 Introduction Automated assembly refers to the use of mechanized and automated devices to perform the various assembly tasks in an assembly line or cell. The vast majority of automated assembly systems are designed to perform a fixed sequence of assembly steps on a specific product. Automated assembly is considered appropriate if it meets the following conditions: BULLETLIST High product demand—for products made in millions of units, or close to this range Stable product design—product design changes means changes in workstation tooling which can be expensive A limited number of components in the assembly—a maximum of a dozen parts Product designed for automated assembly ENDLIST Although automated assembly systems are considered expensive to create and implement, the capital investment required is not as great as for automated transfer lines, because work units produced on automated assembly systems are usually smaller, which means that the large mechanical forces and power requirements used for transfer line operations are not necessary. Automated assembly systems tend to be physically smaller than transfer lines, which usually reduces the cost of the system. KEYPOINT Automated assembly refers to the use of mechanized and automated devices to perform the various assembly tasks in an assembly line or cell. END KEYPOINT In this unit a general overview of automated assembly systems is offered, which examines both the fundamentals of automated assembly systems and quantitative analysis. 14.2 Learning Objectives After completing this unit you will be able to: BULLET LIST Describe automated assembly systems, and their associated sy
Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)
正在生成预览...
Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)
14. Automated Assembly Systems 14.1 Unit Introduction 14.2 Unit Objectives 14.3 Fundamentals of Automated Assembly Systems 14.4 Parts Delivery at Workstations 14.5 Quantitative Analysis of Assembly Systems 14.6 Partial Automation 14.7 What the Equations Tell Us 14.8 Unit Review 14.9 Self Assessment Questions 14.10 Self Assessment Answers 14.1 Introduction Automated assembly refers to the use of mechanized and automated devices to perform the various assembly tasks in an assembly line or cell. The vast majority of automated assembly systems are designed to perform a fixed sequence of assembly steps on a specific product. Automated assembly is considered appropriate if it meets the following conditions: BULLETLIST High product demand—for products made in millions of units, or close to this range Stable product design—product design changes means changes in workstation tooling which can be expensive A limited number of components in the assembly—a maximum of a dozen parts Product designed for automated assembly ENDLIST Although automated assembly systems are considered expensive to create and implement, the capital investment required is not as great as for automated transfer lines, because work units produced on automated assembly systems are usually smaller, which means that the large mechanical forces and power requirements used for transfer line operations are not necessary. Automated assembly systems tend to be physically smaller than transfer lines, which usually reduces the cost of the system. KEYPOINT Automated assembly refers to the use of mechanized and automated devices to perform the various assembly tasks in an assembly line or cell. END KEYPOINT In this unit a general overview of automated assembly systems is offered, which examines both the fundamentals of automated assembly systems and quantitative analysis. 14.2 Learning Objectives After completing this unit you will be able to: BULLET LIST Describe automated assembly systems, and their associated sy
阅读全文
- 文档名称
- Automated Assembly Systems (Unit 14) (Hệ thống lắp ráp tự động)
- 学校 / 课程
- Đại học Bách khoa Hà Nội · Tự động hóa sản xuất
- 内容
- Tài liệu này cung cấp cái nhìn tổng quan về hệ thống lắp ráp tự động, bao gồm các khái niệm cơ bản, cách thức vận chuyển bộ phận, và phân tích định lượng. Nó cũng thảo luận về các cấu hình hệ thống và tự động hóa một phần.
- 目录
- 14. Automated Assembly Systems
- 14.1 Unit Introduction
- 14.2 Unit Objectives
- 14.3 Fundamentals of Automated Assembly Systems
- 14.4 Parts Delivery at Workstations
- 14.5 Quantitative Analysis of Assembly Systems
- 14.6 Partial Automation
- 14.7 What the Equations Tell Us
- 14.8 Unit Review
- 14.9 Self Assessment Questions
- 14.10 Self Assessment Answers
- 14. Introduction
- 14.2 Learning Objectives
- 14.3 Fundamentals of Automated Assembly Systems
- 14.3.1 System Configurations
- 页数
- 23 页
- 上传者
- Uni24h
- 答案
- 包含答案 / 解析
评论 (0)
暂无评论。快来抢沙发吧!
Material Transport Systems (Unit 8) (Hệ thống vận chuyển vật liệu)
Automated Manufacturing Systems (Unit 12) (Hệ thống sản xuất tự động)
Automatic Identification (Unit 10) (Nhận dạng tự động)
Product Design and CAD/CAM (Unit16) (Thiết kế sản phẩm và CAD/CAM)
Sensors and actuators (Unit 4) (Cảm biến và cơ cấu chấp hành)
Chương 7.Cơ học lượng tử - Vật lý đại cương 3 - TS.Nguyễn Thị Trang
Chương 6.Quang học lượng tử - Vật lý đại cương 3 - TS.Nguyễn Thị Trang
Chương 5.Thuyết tương đối - Vật lý đại cương 3 - TS.Nguyễn Thị Trang
Chương 4. Tán xạ ánh sáng - Vật lý đại cương 3 - TS.Nguyễn Thị Trang
Chương 3.Phân cực ánh sáng - Vật lý đại cương 3 - TS.Nguyễn Thị Trang

评论 (0)
暂无评论。快来抢沙发吧!