Trang 1
Passage 2 HARD-PASTE PORCELAIN
1
SECTION 2
READING PASSAGE 2
You should spend about 20 minutes on Question 14-27 which are based on Reading
Passage 2 below.
HARD-PASTE PORCELAIN
Definition and origin
The term porcelain refers to ceramics made from similar materials and baked at high
temperatures which are light, durable, and vitreous.* Porcelain combines the positive
qualities of glass and clay – glass is smooth and translucent while clay retains its shape
when moulded. However, due to the addition of a few more minerals, porcelain is
stronger than either glass or clay. It is also extremely beautiful and valuable: Chinese
Ming Dynasty (1368-1644 AD) bowls can fetch a million dollars on the international art
market.
For around fifteen hundred years, porcelain has been employed as tableware and
decoration, but its more recent applications include dental crowns and electrical
insulators.
Porcelain was first made in China. During the Tang Dynasty (618-907 AD), small amounts
were used by the court and the very rich. High-quality porcelain, like that manufactured
today, was not widely available until the Yuan Dynasty (1279-1368 AD).
Chinese porcelain was traded with kingdoms in Central, Southeast Asia, and the Middle
East from the seventh century. By the Middle Ages, it had reached Europe.
European obsession
Porcelain was consumed in enormous quantities by European royal families, nobles, and
the church, all of whom tried desperately to discover its chemical composition. The
English word, ‘porcelain’, derives from the Portuguese name for a sea creature, the
nautilus, which has a spiral orange vitreous shell from which it was believed at one time
that porcelain was made. Other more astute Europeans contended the ceramic
contained crushed glass or bone.
Early experiments in the production of porcelain included adding ground glass to clay.
The result is called ‘soft-paste’ as it is weaker than true porcelain.
Trang 2
Passage 2 HARD-PASTE PORCELAIN
2
So great was the frenzy for possessing Chinese porcelain, or attempting to recreate their
own hard-paste, that a number of European principalities endangered themselves
financially, spending as much of their budgets on pursuing porcelain as on their armies.
Frederick II of Prussia (now in Germany) was one such fanatic. Fortunately, for Prussia,
two scientists – Johann Böttger and Ehrenfried von Tschimhaus – in the monarch’s
service, solved the porcelain puzzle. Their discovery, made in 1707, combined clay with
ground feldspar – a mineral containing aluminium silicate.
Meanwhile, in England, the recipe was a little different: ash, from cattle bones, was
mixed with clay, feldspar, and quartz. This became known as ‘bone china’ and is still
manufactured. Although not true porcelain, it remains popular in the US and the UK
because it is harder than porcelain.
Constituents
The raw materials from which porcelain is made are abundant. They are white clay
(china clay or ball clay), feldspar, or perhaps flint, and silica – all of which are noted for
their small articles. Feldspar and flint are used as fluxes, which reduce the temperature
needed for firing and bind the glass, silica, and clay granules. Porcelain may also contain
other ingredients like alumina or steatite.
Manufacture
To produce porcelain, the raw materials are selected and weighed. Then, they are
crushed in a two-stage process. Jaw crushers work first; mullers or hammer mills
subsequently reduce particles to 0.25cms (0.1 inch) or less in diameter. A third crushing,
using ball mills, takes place for the finest porcelain. During purification, which follows,
granules that are not of uniform size are screened out. Magnetic filtration then removes
iron, commonly found in clay, because this prevents the porcelain from forming
correctly. The fifth stage, preparatory to firing, is formation. There are several types of
formation by hand or machine. After formation, the ware undergoes its initial firing in a
kiln – a special oven.
A glaze is a glassy liquid similar in composition to porcelain. If a porcelain object is
painted, a glaze covers the paint, or its decoration may just be the glaze. Glaze is applied
by painting or dipping and takes place after the first firing. Not only are porcelain wares
gorgeous, but their decoration and glazing are also of great interest.
In making porcelain, the temperature in the kiln is critical – high enough to reconstitute
the elements, yet low enough to vaporise contaminants and minimise shrinkage. A
typical temperature is 1454° Celsius (2650° Fahrenheit).
Trang 3
Passage 2 HARD-PASTE PORCELAIN
3
During the firing process, a number of chemical reactions occur. Carbon-based
impurities burn out at 100-200°C (215-395°F). As the kiln is heated, carbonates and
sulfates decompose. When heated to 700-1100°C (1295-2015°F), the fluxes react with
the decomposing minerals to form liquid glass. After a certain density is reached, at
around 1200°C (2195°F), the ware is cooled, causing the liquid glass to solidify.
Pause for thought
So, next time you dine from fine porcelain, take a moment to reflect on the complicated
history and sophisticated manufacture of this exquisite product.
--------------------------------------------
* Having a glassy appearance
Questions 14-18
For which places are the following statements about porcelain true?
In boxes 14-18 on your answer sheet, write:
A China
B Europe
C Both China and Europe
14 Here, dishes have sold for very high prices.
15 It was first invented here.
16 Its English name comes from here.
17 Military and porcelain expenditure was equal in some places here.
18 Here ‘bone china’ was produced.
Trang 4
Passage 2 HARD-PASTE PORCELAIN
4
Questions 19-23
Label the stages in the process below.
Choose NO MORE THAN TWO WORDS OR A NUMBER from the passage for each
answer.
Write your answers in boxes 19-23 on your answer sheet.
1 Selection of 19 ...............................
2 Weighing
3 Crushing: a. Jaw crushers
Trang 5
Passage 2 HARD-PASTE PORCELAIN
5
b. Mullers/hammer mills – particles < 20 ............................. in diameter
c. Smaller particles for finer porcelain
4 21 ............................... : a. Non-uniform granules screened out
b. Iron removed by magnetic filtration
5 Formation: a. Manual b. Mechanical
6 22 ............................... : Wares placed in a kiln and baked
7 Decoration: 23 ............................... and/or painting
8 Second firing
Questions 24-27
Complete the notes below.
Choose ONE WORD OR A NUMBER from the passage for each answer.
Write your answers in boxes 24-27 on your answer sheet.
FIRING PORCELAIN
Chemical
reaction Event Temperature
range
1 Carbon-based impurities 24 ...................... out 100-200° C
2 Temperature rises inside 25 ...................... →
decomposition of carbonates & sulphates
3 Fluxes + decomposing minerals → liquid
glass 26 .........-1100° C
4 Density reached: liquid glass begins to
27 .......................
c 1200-1454° C
Cooling Porcelain complete c 1454-15° C
Trang 6
Passage 2 HARD-PASTE PORCELAIN
6
ANSWER
14. C
15. A
16. B
17. B
18. B
19. Raw materials (capital optional)
20. 0.25 cm/0.1 inch
21. Purification (capital optional)
22. First/ Initial firing (capital optional)
23. glazing
24. burn
25. kiln
26. 700
27. solidify
Hiển thị 6 trang đầu. Tải tài liệu để xem đầy đủ.
Bình luận (0)
Chưa có bình luận nào. Hãy là người đầu tiên!